LVM transfer pumps

The LVM range of pumps can pump fresh water, sea water and several are also suitable for other fluids, such as diesel. They are quiet and hard working, last a long time, and draw a very small amount of power for their performance.

About LVM Pumps

Light, efficient and very simple to install and use, LVM’s plastic-bodied dc centrifugal pumps are designed for use in small boats. The pumps will handle fresh or salt water, and some are suitable for diesel fuel transfer. Fitted with an integral plastic strainer, they are useful for pumping out narrow bilge spaces. The submersible models are slim enough to fit easily through a 38mm bunghole in a plastic water container. With the removal of the white strainer cap, a hose connector is exposed on the inlet, allowing instant conversion to an in-line freshwater pump able to supply a single tap.

These pumps are not self-priming.

Other uses include deck shower, deck/anchor wash, and bait tank aeration.

No LVM pump should be used for petrol, solvents, or any liquid with a flash point below 37C

Nile – LVM107 centrifugal submersible, inline pump

(12 volt only)

Pumps 12.5 lpm at a gentle 11 psi
Diesel, fresh and sea water
Bait tank aeration, diesel transfer/refuelling. Water transfer.
Water systems to 80 degrees Celsius. Submersible or gravity feed.
Continuously rated. should not be run dry for long periods.

Amazon – centrifugal submersible, inline pump

Available in two models – LVM105 (12 volt) and LVM117 (24 volt)

Strong 17.8 lpm at 14 psi
Diesel, fresh and sea water
Water systems to 80 degrees Celsius
Fast diesel refuelling/transfer with no spillage
Water transfer/clearance. Deck showers. Deck washdowns
Bilge clearance in tight areas
Continuously rated. Show not be run dry for long periods

Congo – centrifugal submersible, inline pump

Available in two models – LVM111 (12 volt) and LVM112 (24 volt)

Powerful 31 lpm at 14 psi
Diesel, fresh and sea water
Rapid diesel refuelling/transfer without spillage
Water transfer. Deck showers. Deck washdowns.
Bilge clearance in tight areas
Continuously rated. Should not be run dry for long periods

Missouri – flexible impeller self-priming inline pump

Available in two models – LVM165 (12 volt) and LVM166 (24 volt)

Stong 17.8 lpm at 16 psi. Reversible flow.
Self priming to 2 metres.
Diesel, fresh and sea water. Liquid temperature 4 degrees to 60 degrees Celsius.
Diesel refuelling/transfer.
Bilge clearance in tight areas.
Continuously rated.

Dry running of more than 30 seconds will seriously damage the impeller, however, it is quickly replaceable.

Yukon – flexible impeller self-priming inline pump

Available in two models – LVM176 (12 volt) and LVM177 (24 volt)

Powerful 33 lpm at 23 psi. Reversible flow.
Self priming to 2.5 metres.
Diesel, fresh and sea water. Liquid temperature 4 degrees to 60 degrees Celsius.
Diesel refuelling/transfer.
Bilge clearance in tight areas.
Continuously rated.

Dry running of more than 30 seconds will seriously damage the impeller which however, is quickly replaceable.

Order now for fast delivery :